Unlock Your Kingston Usb Flash Drive: Learn How To Remove Write Protection Now!
What To Know
- A write-protected USB flash drive is a storage device that has been configured to prevent users from writing new data to it.
- This can happen due to various reasons, such as the device being locked by the system administrator, the flash drive being formatted as read-only, or the drive’s hardware being faulty.
- Connect your USB flash drive to your computer and try to copy a file to it.
If you’re a frequent user of Kingston USB flash drives, you’ve probably encountered the dreaded “write protection” error at least once. This frustrating issue can prevent you from saving or transferring data to your drive, making it practically useless. But don’t despair! There are several ways to remove write protection from your Kingston flash drive and get back up and running. In this article, we’ll show you several methods you can try to remove write protection from your Kingston flash drive.
How To Remove Write Protection On Kingston Usb Flash Drive
Follow this guide to learn how to remove write protection from a Kingston USB Flash Drive.
1. Go to the “Start” menu, then “Run” and type “cmd” (without the quotes).
2. In the command prompt, type “diskpart” (without the quotes) and press enter.
3. Type “list disk” (without the quotes) and press enter.
4. Type “select disk n” (without the quotes, where n is the number of your USB drive) and press enter.
5. Type “attributes disk clear readonly” (without the quotes) and press enter.
6. Type “exit” (without the quotes) and press enter.
7. Your Kingston USB Flash Drive should now be writable.
If you are unable to remove the write protection, you might need to try another method. For example, you can try formatting the USB drive. However, before you format the USB drive, be sure to back up any important files that you have on it.
Alternatively, you can try using a different USB port on your computer. Sometimes, a USB port can become damaged or dirty, which can cause the write protection problem.
If none of these methods work, you may need to contact Kingston’s customer support for further assistance.
What Are The Common Causes Of Write Protection On Usb Flash Drives?
- 1. Physical damage: physical damage to the USB connector or circuit board can cause write protection.
- 2. File system corruption: corruption of the file system on the USB flash drive can cause write protection.
- 3. Virus or malware: a virus or malware infection can cause write protection.
- 4. Hardware failure: a hardware failure in the USB flash drive can cause write protection.
- 5. Driver issues: outdated or incompatible drivers can cause write protection.
How Do I Check If My Usb Flash Drive Is Write Protected?
A USB flash drive is a handy device that allows you to store and transfer data. However, sometimes you may encounter a write-protected error when you try to write data to your USB flash drive.
What is a Write-Protected USB Flash Drive?
A write-protected USB flash drive is a storage device that has been configured to prevent users from writing new data to it. This can happen due to various reasons, such as the device being locked by the system administrator, the flash drive being formatted as read-only, or the drive’s hardware being faulty.
How to Check If Your USB Flash Drive Is Write Protected
There are several ways to check if your USB flash drive is write protected:
1. Check the Properties: Right-click on the USB flash drive icon in File Explorer and select “Properties.” In the Properties window, go to the “Security” tab and see if the “Write Protection” checkbox is checked. If it is, your USB flash drive is write protected.
2. Use a Command Prompt: Open a command prompt and type “attrib -r -h /s /d e:*.*” (without the quotes). This command will list all the files on your USB flash drive. If a file is listed as “Read-only,” “Hidden,” or “System,” it is write protected.
3. Try Writing Data: Connect your USB flash drive to your computer and try to copy a file to it. If you get an error message saying that the file is write-protected, your USB flash drive is write protected.
How Do I Remove The Write Protection From My Kingston Usb Flash Drive Using Cmd?
To remove the write protection from your Kingston USB flash drive using CMD, follow these steps:
1. Open Command Prompt as an administrator by searching for “cmd” in the Windows search bar and right-clicking on the Command Prompt icon to select “Run as administrator.”
2. Type “diskpart” and press Enter to launch the DiskPart utility.
3. Type “list disk” and press Enter to display all the disks connected to your computer.
4. Type “select disk n” (replace “n” with the number corresponding to your Kingston USB flash drive) and press Enter to select the disk.
5. Type “attributes disk clear readonly” and press Enter to remove the write protection.
6. Type “exit” and press Enter to close the DiskPart utility.
7. Restart your computer for the changes to take effect.
Note: Make sure to select the correct disk number in step 4 to avoid causing any accidental data loss.
How Do I Remove The Write Protection From My Kingston Usb Flash Drive Using Diskpart?
To remove the write protection from your Kingston USB flash drive using Diskpart, follow these steps:
1. Open Command Prompt as an administrator.
2. Type “diskpart” and press Enter.
3. Type “list disk” and press Enter.
4. Identify your USB flash drive’s number.
5. Type “select disk (number)” and press Enter, replacing (number) with the number assigned to your USB flash drive.
6. Type “attributes disk clear readonly” and press Enter.
7. Type “exit” and press Enter to close the Diskpart utility.
8. Restart your computer.
After following these steps, you should be able to remove the write protection from your Kingston USB flash drive and access it without issue. Keep in mind that these steps involve using the command line, so it’s essential to be careful and double-check the commands you enter to avoid any potential issues.
How Do I Remove The Write Protection From My Kingston Usb Flash Drive Using A Third Party Tool?
A third party tool can be used to remove the write protection from a Kingston USB flash drive. One such tool is “USB Disk Storage Format Tool”. This is a free tool that can be downloaded from the internet.
Here are the steps to remove the write protection from your Kingston USB flash drive using “USB Disk Storage Format Tool”:
1. Download and install “USB Disk Storage Format Tool” on your computer.
2. Connect your Kingston USB flash drive to your computer.
3. Launch “USB Disk Storage Format Tool”.
4. Select your Kingston USB flash drive from the list of drives.
5. Click on the “Options” button.
6. Uncheck the “Quick Format” option.
7. Click on the “Start” button.
8. The format process will begin.
9. Wait for the process to complete.
10. Once the format process is complete, the write protection should be removed from your Kingston USB flash drive.
Note: It is important to note that formatting a USB flash drive will erase all the data on it. So, make sure you have a backup of the data before formatting the drive.
Summary
In conclusion, removing write protection on a Kingston USB flash drive is a fairly simple process that can be completed in a matter of minutes. By following the aforementioned steps, you should be able to regain full access to your drive and continue using it as normal.
