Step-by-Step Guide: Install Deepcool AK400 Like a Pro!
What To Know
- The radiator and the pump are pre-installed, however, the radiator fan and the pump fan need to be installed.
- If the motherboard does not have an arrow or marking, you can install the fan in any direction, but it is best to install it so that it blows air over the CPU and RAM.
- The direction in which the fan is installed depends on the motherboard, and it is important to make sure that the fan is properly connected before starting the system.
Deepcool is a company that specializes in cooling solutions for computers. They have a wide range of products, including CPU coolers, case fans, and all-in-one liquid coolers. The Deepcool AK400 is one of their all-in-one liquid coolers. It is designed to provide excellent cooling performance for high-end processors. In this blog post, we will show you how to install the Deepcool AK400 on your PC.
How To Install Deepcool Ak400
Deepcool AK400 comes in an anti-vibration rubber grommet set, thermal paste, and a user manual. The radiator and the pump are pre-installed, however, the radiator fan and the pump fan need to be installed.
Installation of Deepcool AK400:
1. Assembling the radiator and the pump:
* Start by attaching the pump to the radiator. The backplate of the pump will align with the radiator.
* Next, insert the four screws and tighten them by hand.
* Install the rubber grommets on the screws for anti-vibration.
2. Installing the radiator fan:
* Place the fan on top of the radiator.
* Install the screws in the fan holes.
* Attach the fan to the radiator using the screws.
3. Installing the pump fan:
* The pump fan comes pre-installed with 3 screws.
* Place the fan on top of the pump.
* Attach the fan to the pump using the screws.
4. Connecting the radiator and the pump:
* The pump comes with four cable ties. Use the cable ties to secure the pump cables.
* Connect the pump cables to the radiator.
* Connect the SATA power cable to the pump.
5. Connecting the fans:
* Connect the radiator fan to the motherboard using the provided 4-pin PWM cable.
* Connect the pump fan to the motherboard using the provided 3-pin cable.
6. Installing the thermal paste:
* Remove the protective film from the thermal paste.
* Apply a thin layer of thermal paste to the CPU.
* Place the pump on the CPU.
7. Installing the radiator:
* Install the radiator on the motherboard.
How Do I Remove The Motherboard From My Desktop Computer?
- 1. Unplug all cables and power sources from your computer.
- 2. Remove the side panel of your computer case.
- 3. Locate the screws that secure the motherboard to the case and remove them using a screwdriver.
- 4. Gently lift the motherboard out of the case and set it aside.
- 5. Replace the side panel of your computer case and plug all cables and power sources back in.
Which Direction Do I Install The Cooling Fan On My Motherboard?
Cooling fans are used to keep the motherboard cool and prevent it from overheating. When a motherboard overheats, it can cause serious damage to the components, and in extreme cases, it can cause the motherboard to fail completely. To prevent this, it is important to install a cooling fan on the motherboard.
However, you may be wondering which way to install the cooling fan. The answer is that it depends on the motherboard. Some motherboards have a small arrow or marking that indicates the direction in which the fan should be installed. If the motherboard does not have an arrow or marking, you can install the fan in any direction, but it is best to install it so that it blows air over the CPU and RAM.
It is also important to make sure that the fan is properly connected to the motherboard. Most motherboards have a small connector that the fan plugs into. Once the fan is connected, you can start the system and make sure that the fan is running. If the fan is not running, you may need to check the connections or the fan itself.
In conclusion, it is important to install a cooling fan on the motherboard to prevent overheating. The direction in which the fan is installed depends on the motherboard, and it is important to make sure that the fan is properly connected before starting the system.
How Do I Install The Backplate On My Motherboard?
To install the backplate on your motherboard, follow these steps:
1. Unbox the backplate and the screws that will come with it.
2. Locate the screw holes on the motherboard. The holes are usually labeled with numbers or letters.
3. Align the backplate with the screw holes on the motherboard.
4. Carefully insert the screws into the screw holes on the motherboard. Make sure that the screws are inserted straight and securely.
5. Tighten the screws with a screwdriver or a small wrench. Apply even pressure to ensure that the backplate is securely attached to the motherboard.
6. Once the backplate is installed, you can install other components such as the CPU cooler, RAM, and graphics card.
Note: It is recommended to consult your motherboard’s manual for detailed instructions and safety precautions.
How Do I Install The Standoffs On My Motherboard?
To install standoffs on your motherboard, follow these steps:
1. Start by gathering the necessary materials, including your motherboard, standoffs, screws, and a screwdriver.
2. Locate the mounting holes on your motherboard. These holes are typically labeled or marked with a small symbol to indicate their function.
3. Place a standoff in each mounting hole, ensuring that they are evenly spaced and oriented correctly.
4. Use the screwdriver to gently screw the standoffs into the mounting holes. Start by screwing them in by hand until they feel snug, and then tighten them further with the screwdriver.
5. Repeat the process for each mounting hole until you have installed all of the standoffs.
6. Once you have installed the standoffs, you can proceed with installing your motherboard in the case. Align the motherboard with the standoffs, and then screw it into place using the screws provided.
7. Make sure that all of the screws are tightened securely, and then power on your system to verify that it is functioning correctly.
By following these steps, you can install standoffs on your motherboard and ensure that it is properly secured in place.
How Do I Install The Cooler On My Motherboard?
To install a cooler on your motherboard, follow these steps:
1. Remove the motherboard from the case.
2. Inspect the motherboard for any obstructions, such as capacitors or heat sinks, that might interfere with the cooler installation.
3. Place the cooler on top of the CPU, aligning the mounting holes with the holes in the motherboard.
4. Insert the screws or standoffs that came with the cooler into the holes, and tighten them using a screwdriver or wrench.
5. Apply thermal paste to the top of the cooler, spreading it evenly in a thin film.
6. Carefully lower the cooler onto the CPU, ensuring that the cooler is seated evenly on the CPU and that all four corners are making good contact with the processor.
7. Replace the motherboard in the case, making sure to reconnect any cables or connectors that were removed.
8. Turn on the computer and test the cooler for proper installation.
Note: It’s important to follow the manufacturer’s instructions for the cooler and motherboard to ensure a proper installation.
Final Note
In conclusion, the Deepcool AK400 is an outstanding choice for gamers and PC enthusiasts who want to improve the performance of their systems. Its high airflow and cooling capacity ensure that even the most powerful components stay cool, while its modular design makes it easy to install and maintain. Overall, the Deepcool AK400 is an excellent value for the price and is sure to satisfy the needs of any serious PC user.
