Home Troubleshooting For CPU & PC Components
Guide

Diy Keyboard Disassembly: Learn How To Take Apart Your Corsair K63 In Minutes

Isaac Lee is the lead tech blogger for Vtech Insider. With over 10 years of experience reviewing consumer electronics and emerging technologies, he is passionate about sharing his knowledge to help readers make informed purchasing decisions.

What To Know

  • You’ll need a set of small screwdrivers (Phillips head and flathead), a pair of tweezers, and a clean work surface.
  • Place your keyboard on a soft surface, such as a towel or a piece of foam, to prevent scratches or damage during disassembly.
  • Carefully insert a flathead screwdriver into the small slot on the side of the stabilizer.

If you’re looking for a detailed guide on how to disassemble your Corsair K63 mechanical keyboard, you’ve come to the right place. In this comprehensive guide, we’ll take you through each step of the disassembly process, providing you with clear instructions and helpful tips. Whether you’re looking to clean your keyboard, replace a switch, or simply explore its inner workings, this guide will equip you with the knowledge and skills you need.

1. Safety First: Preparing for Disassembly

Before you begin disassembling your Corsair K63, it’s essential to take a few precautionary measures to ensure a safe and successful process.

  • Power Down and Disconnect: Ensure that your keyboard is powered off and disconnected from your computer. This will prevent any potential electrical hazards.
  • Gather the Necessary Tools: You’ll need a set of small screwdrivers (Phillips head and flathead), a pair of tweezers, and a clean work surface.
  • Protect Your Keyboard: Place your keyboard on a soft surface, such as a towel or a piece of foam, to prevent scratches or damage during disassembly.

2. Removing the Keycaps

With the preparatory steps taken care of, let’s start the disassembly process by removing the keycaps.

  • Use a Keycap Puller: A keycap puller is a specialized tool designed to safely remove keycaps without damaging them. If you don’t have one, you can use a pair of tweezers, but be careful not to apply too much force.
  • Start with the Larger Keys: Begin by removing the larger keys, such as the spacebar, shift keys, and enter key. These keys have stabilizers underneath them, which can be tricky to remove.
  • Be Gentle: Apply gentle pressure and wiggle the keycap slightly to loosen it from the switch. Don’t force it off, as this can damage the switch or the keycap.

3. Disconnecting the Stabilizers

Once you’ve removed the larger keys, you’ll need to disconnect the stabilizers.

  • Locate the Stabilizers: Stabilizers are located beneath the larger keys and help to keep them stable when pressed.
  • Use a Flathead Screwdriver: Carefully insert a flathead screwdriver into the small slot on the side of the stabilizer.
  • Gently Pry Up: Apply gentle pressure to pry the stabilizer up and disconnect it from the switch.

4. Removing the Switches

Now it’s time to remove the switches from the keyboard.

  • Use a Switch Puller: A switch puller is a tool specifically designed to remove switches without damaging them. If you don’t have one, you can use a pair of tweezers, but be careful not to bend or damage the switch pins.
  • Insert the Switch Puller: Insert the switch puller into the switch housing.
  • Pull Upward: Apply gentle pressure and pull the switch upward until it comes out of the keyboard.

5. Detaching the PCB from the Base Plate

The next step is to detach the printed circuit board (PCB) from the base plate.

  • Remove the Screws: Locate the screws that secure the PCB to the base plate.
  • Use a Phillips Head Screwdriver: Use a Phillips head screwdriver to remove these screws.
  • Lift the PCB: Carefully lift the PCB away from the base plate. Be mindful of any wires or connectors that may be attached to the PCB.

6. Cleaning and Inspection

With the keyboard disassembled, it’s an excellent opportunity to clean and inspect its components.

  • Brush the PCB: Use a soft brush to gently remove any dust or debris from the PCB.
  • Inspect the Switches: Check the switches for any damage or wear and tear. If you find any faulty switches, you can replace them with new ones.
  • Clean the Keycaps: Use a keycap cleaning solution and a soft cloth to clean the keycaps.

7. Reassembly: Putting It All Back Together

Once you’ve cleaned and inspected the components, it’s time to reassemble the keyboard.

  • Start with the Switches: Insert the switches back into their respective positions on the PCB.
  • Reconnect the Stabilizers: Reattach the stabilizers to the larger keys.
  • Replace the PCB: Carefully align the PCB with the base plate and secure it with the screws.
  • Reattach the Keycaps: Press each keycap firmly onto its switch until you hear a click, indicating that it’s securely in place.

Recommendations: A Deeper Understanding of Your Mechanical Keyboard

Disassembling your Corsair K63 mechanical keyboard can provide valuable insights into its inner workings and allow you to perform maintenance, cleaning, and repairs with ease. Whether you’re a seasoned enthusiast or simply curious about the mechanics of your keyboard, this guide has equipped you with the knowledge and skills to confidently disassemble and reassemble your Corsair K63.

Information You Need to Know

Q: Can I disassemble my Corsair K63 without voiding the warranty?

A: Disassembling your Corsair K63 may void the warranty. It’s best to consult the warranty terms and conditions before attempting disassembly.

Q: How often should I clean my Corsair K63?

A: Cleaning your Corsair K63 regularly is essential to maintain its performance and longevity. Aim to clean it every few months or as needed.

Q: What are some common issues that can be fixed by disassembling the Corsair K63?

A: Disassembling the Corsair K63 can allow you to fix issues such as faulty switches, stuck keys, and connectivity problems.

Isaac Lee

Isaac Lee is the lead tech blogger for Vtech Insider. With over 10 years of experience reviewing consumer electronics and emerging technologies, he is passionate about sharing his knowledge to help readers make informed purchasing decisions.

Popular Posts:

Back to top button