How To Clear Cmos On Asrock Motherboard: A Simple Guide

If you’re a computer enthusiast, you know that clearing CMOS on your motherboard can be necessary from time to time. Whether you’re troubleshooting a problem or just getting ready to overclock your CPU, knowing how to clear CMOS on your ASRock motherboard is essential. In this post, we’ll show you how to do it quickly and easily.

How To Clear Cmos On Asrock Motherboard

ASRock motherboards are one of the most popular choices for PC builders. They offer a range of features, including overclocking capabilities, that make them a great choice for gamers and enthusiasts.

However, sometimes you may need to clear CMOS on your ASRock motherboard. CMOS, which stands for Complementary Metal-Oxide Semiconductor, is a type of memory that stores BIOS settings. Clearing CMOS can help resolve certain issues, such as incorrect BIOS settings or problems with overclocking.

To clear CMOS on your ASRock motherboard, you will need to locate the CMOS jumper. This is usually a small, rectangular jumper located close to the battery on the motherboard.

Once you have located the CMOS jumper, you will need to remove it. To do this, gently pry the jumper up with a flathead screwdriver or other thin tool. Be careful not to damage the motherboard or any other components.

Once the jumper has been removed, you will need to wait a few seconds before putting it back in place. This will help clear the CMOS memory.

Once the CMOS jumper is in place, you will need to power on your computer. If the issue you were experiencing has been resolved, you will not need to perform any further steps.

However, if the issue persists, you may need to repeat the process. In some cases, you may need to use a different method to clear the CMOS, such as using the BIOS or using a software tool.

It is important to clear CMOS carefully and correctly. Failure to do so can cause damage to your motherboard or other hardware.

What Are The Benefits Of Clearing The Cmos On My Asrock Motherboard?

• 1. Improve system stability: Clearing the CMOS can help fix issues related to incorrect BIOS settings, such as boot failure or incorrect time/date settings.
• 2. Resolve overclocking issues: If you experience problems after overclocking your motherboard, clearing the CMOS can help reset the BIOS settings to default, which can sometimes resolve these issues.
• 3. Fix memory compatibility issues: If you are experiencing issues with your memory modules, such as incorrect memory timings or compatibility issues, clearing the CMOS can help reset the BIOS settings to default, which can sometimes resolve these issues.
• 4. Enable new features: In some cases, you may need to clear CMOS to enable new features or configuration options in the BIOS.
• 5. Increase performance: In some cases, clearing the CMOS can help increase the performance of your system, although this is not guaranteed and will depend on the specific motherboard and BIOS version.

Are There Any Risks Associated With Clearing The Cmos On My Asrock Motherboard?

Clearing the CMOS on your ASRock motherboard is not inherently risky, but it can cause your system to lose its BIOS settings and potentially render it inoperable if done incorrectly. It’s important to understand the process and potential risks before proceeding.

What is the CMOS?

The CMOS (Complementary Metal-Oxide Semiconductor) is a type of memory chip that stores BIOS settings. The BIOS (Basic Input/Output System) is the firmware that initializes your computer when you turn it on, and it stores information such as system date and time, boot order, and hardware settings.

Why clear the CMOS?

You may need to clear CMOS if your computer is not booting correctly or if your BIOS settings have been corrupted. This can happen due to a variety of factors, such as a power outage, a failed BIOS update, or the installation of incompatible hardware.

Risks of clearing the CMOS

The main risk of clearing the CMOS is losing your BIOS settings. This includes the date and time, boot order, and other settings that are essential for your computer to function properly. If these settings are lost, your computer may not boot properly or may not recognize your hardware.

Another risk is damaging your motherboard. The CMOS battery is a small coin cell battery that powers the CMOS memory. If the battery is removed or discharged, the CMOS memory can be corrupted. This can cause the motherboard to fail or behave erratically.

How to clear CMOS

To clear the CMOS on your ASRock motherboard, you will need to locate the CMOS jumper or dip switch on your motherboard. This is usually located near the battery, and it may be labeled “CMOS” or “Clear CMOS.

How Often Should I Clear The Cmos On My Asrock Motherboard?

Asrock motherboards are designed to be durable and long-lasting, and the CMOS battery is typically good for around ten years. However, it’s always a good idea to check the CMOS battery regularly to ensure that it’s functioning properly. If the CMOS battery is dead, you’ll need to replace it with a new one. Additionally, it’s always a good idea to clear the CMOS settings if you’re experiencing problems with your computer. This can be done by removing the CMOS battery for a few minutes, or by accessing the CMOS setup utility and clearing the settings. It’s generally not necessary to clear the CMOS settings on a regular basis, but it’s a good idea to do so if you’re experiencing problems with your computer.

What Steps Do I Need To Take To Clear The Cmos On My Asrock Motherboard?

Clearing the CMOS on your ASRock motherboard is a relatively simple process, but it’s important to follow the steps carefully to avoid damaging any components. Here are the steps you need to take to clear the CMOS on your ASRock motherboard:

1. Turn off your computer and unplug the power cord.

2. Locate the CMOS jumper on your motherboard. It will be a small, two-pronged jumper that is usually located near the CMOS battery.

3. Use a screwdriver to move the jumper from its default position (usually closed) to the opposite position (usually open).

4. Leave the jumper in this position for at least 10 seconds.

5. Return the jumper to its original position (usually closed).

6. Plug the power cord back into your computer and turn it on.

7. When the computer starts up, enter the BIOS setup menu by pressing a specific key (usually F2 or Delete).

8. In the BIOS setup menu, locate the “Load Default Settings” or “CMOS Reset” option and use it to restore your CMOS settings.

9. Save your changes and exit the BIOS setup menu.

10.

Are There Any Alternative Methods To Clear The Cmos On My Asrock Motherboard?

Clearing the CMOS on your ASRock motherboard may be necessary if you encounter issues related to the BIOS settings. Fortunately, there are several alternative methods you can try to clear the CMOS on your ASRock motherboard, even if you don’t have a jumper.

One way to clear the CMOS is by removing the battery from the motherboard for a few minutes. This will cause the CMOS settings to be reset to their default values.

Alternatively, you can try pressing and holding the power button for 4-5 seconds to shut down the computer. Then, unplug the power cord from the wall outlet and wait for at least 30 seconds before plugging it back in. This can sometimes clear the CMOS.

If neither of these methods work, you can try using a metal object, such as a paperclip, to short the two pins on the motherboard that are usually used to clear CMOS. However, it’s essential to be careful when doing this, as you could damage your motherboard if you touch the wrong pins.

Lastly, you can try using a software tool to clear CMOS. ASRock provides a utility called ASRock CMOS_Clear, which can be used to clear the CMOS settings on your motherboard. You can download this tool from the ASRock website.

It’s important to note that clearing CMOS is a troubleshooting step that should only be performed when necessary.

Takeaways

In conclusion, clearing the CMOS on an ASRock motherboard is a quick and easy process that can fix a variety of issues. By following these simple instructions, you can clear the CMOS and get your motherboard back up and running in no time.